MCN box update suggestion

[ktommyx]

Dear MCN PRO BOX team!
I hope your team added next update:
LCD driver read, switch etc
Thank you!

[Mcnbox_support]

hmm, thanks for your suggest !

[ktommyx]

Dear MCN PRO BOX TEAM!
This would be good:
Write only difference original/edited firmware but not complete firmware ("Smart write" function ).

[Mcnbox_support]

We will do our best for customer , and we will did what customer needed too !

Mcnbox

[rec elhuda]

Dear MCN PRO BOX team.help me,please..flashing mt 6235b trackpad read ok but write..not find data..why?help me please..thks

[Mcnbox_support]

which boot you are using ?

[rec elhuda]

Dear MCN PRO BOX team
This was my log..

Welcome to use McnBox!
Selected COM35
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN20101103D0BE7
Firmware V1.08
Checksum 71C1-59BE
Box Connected!
Ready working at COM35
-------------------------------
Start Scanning...
->.
Results:
MTK Chipset CPU: MT6235.
VCC:5,GND:4 7,RXD:10,TXD:9,BOOT:1
[V:5 G:4 7 R:10 T:9 oL:1] Apply to Box
Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: 6235 Ver: 0001 SW:8A01
CPU ID: 00000300
Initialize Boot4 ...
Flash(Nand) Type: [HYNIX] HY27xS08121M/A
Flash(Nand) Code: 00AD0076(00AD0076)
Flash(Nand) Size: 0x04200000 Hex Bytes
Checking baud¡­
Set Baud:921600 Done.
Start Reading(Nand)...
Size: 0x4200000
The phone information:
NEOTEL35_08B_GEMINI_PCB01_GPRS_MT6235B_S01.B300_GH_EN1_TOSHIBA512_V002.BIN
Read done !
Time used: 53 mins 36 s
File saved: C:\Documents and Settings\rec cell\My Documents\china mobile\mtk6235\NEOTEL35_08B_GEMINI_PCB01_GPRS_MT6235B_S01.B300_GH_EN1_TOSHIBA512_V002.BIN


>>>not find data

after the backup included in the save then in the open for write-... results not find the data. only to mtk6235 trackpad, but normal trackball ..thks.

[indra_sumbawa]

MCN BOX without flash nexian w755 mtk 6268