PDA

View Full Version : NEW MTK 6225 NOR ID:0089 880A supported?

ultravox
2010-04-15, 02:53 AM
Hello!

NEW MTK 6225 NOR ID:0089 880A supported?
I can't read firmware with normal USB FLASH cable.
PhoneCareCenter
2010-04-16, 08:24 PM
That CPU is Supported but u need McnBox to do it, u cant use normal USB Cable..... Good Luck

McnPro Box
ultravox
2010-04-18, 07:27 PM
That CPU is Supported but u need McnBox to do it, u cant use normal USB Cable..... Good Luck

McnPro Box

I plan to buy a box for chineese phones, now I have a FLASH USB cable-micro USB, this works with MTK FLASH TOOL good several phones I9+++ I68+ KA08, but now I get an error sometimes: UNSUPPORTED NOR.

So if I buy MCN PRO BOX and cables, this pack will support these phones too?
Have MCN PRO BOX a own software to read and write firmwares?
I bought MTKORE MTK language editorprgram, I want to change phones language wth this. Is this possible?
Thx!
ultravox
2010-04-29, 04:46 AM
I bought MCN PRO box, now I tried to read I68+ firmware but I cant!
Please Help me!

LOG:
Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: 6225 Ver: 8A05 SW:8A00
CPU ID: 033C0800
Initialize Boot...
Flash(Nor) Code: 0089880A(00000000)
Flash(Nor) Size: 0x00000000 Hex Bytes
INT/EXT RAM Size: 0x0000C000+0x00800000
>>Flash ID not found, Try other Bootloader


That CPU is Supported but u need McnBox to do it, u cant use normal USB Cable..... Good Luck

McnPro Box
Mcnbox_support
2010-04-29, 03:08 PM
I bought MCN PRO box, now I tried to read I68+ firmware but I cant!
Please Help me!

LOG:
Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: 6225 Ver: 8A05 SW:8A00
CPU ID: 033C0800
Initialize Boot...
Flash(Nor) Code: 0089880A(00000000)
Flash(Nor) Size: 0x00000000 Hex Bytes
INT/EXT RAM Size: 0x0000C000+0x00800000
>>Flash ID not found, Try other Bootloader

I have replied your post in fast support section , check that and let me know !

thanks