PhoneCareCenter
2009-03-23, 01:31 AM
1 - Open Mcn Pro Software & Select Boot. Like Below
http://img11.imageshack.us/img11/7290/mcnpro1.jpg
2 - Select RX & TX, then select Chip Type.Press Power Button & Press Start.
http://img26.imageshack.us/img26/4314/mcnpro2.jpg
3 - Pinouts will be detected & Applied in few seconds like below, if not Press Apply or Save Pinout.
http://img10.imageshack.us/img10/7907/mcnpro3.jpg
4 - Press Read Button on McnPro Software, choose a location then name the file & Save it.
http://img12.imageshack.us/img12/5873/mcnpro4.jpg
http://img11.imageshack.us/img11/7290/mcnpro1.jpg
2 - Select RX & TX, then select Chip Type.Press Power Button & Press Start.
http://img26.imageshack.us/img26/4314/mcnpro2.jpg
3 - Pinouts will be detected & Applied in few seconds like below, if not Press Apply or Save Pinout.
http://img10.imageshack.us/img10/7907/mcnpro3.jpg
4 - Press Read Button on McnPro Software, choose a location then name the file & Save it.
http://img12.imageshack.us/img12/5873/mcnpro4.jpg